en	Plans and routes: create a routes plan, apply zoning, optimize routes, export routes (roadmap, mobil, GPS, etc)

en	planning, route

en	Optimize routes

en	Pour accéder à la page d’un plan et optimiser vos tournées, cliquez sur le menu « Plans ». Puis dans le menu, sélectionnez le plan souhaité ou créer un plan en cliquant sur « Nouveau » (description dans le chapitre « Créer un plan »).

en	Apply zoning

en	Plan without zoning.

en	Select your zoning from the drop-down list (1). The sectors appear on the map (2). Each sector makes it possible to assign points to a vehicle geographically. :numref:`selection_zoning_mapotempo_600-1`.

en	Select a zoning.

en	Apply the selected zoning by clicking the "Apply Zonings" button (1). Your routes will appear on the interactive map in addition to your zoning (2). The points are assigned to routes (3). A plan report is then visible (4). This report shows the total number of stops, distances, durations and carbon emission rates of all the plan routes. These routes are ready to be optimized. Your zoning and routes are saved in your plan. :numref:`apply_zoning_mapotempo_600`.

en	Applied zoning.

en	Optimization

en	Manual scheduling

en	When you move the mouse over the sequential number of the stop in the list, a "small hand" appears to indicate that the stop is moveable. Click and drop it in the desired order via a "drag-and-drop" :numref:`app-plannings-my_plans-03_edit_manual-num-600`.

en	Move a stop on a route.

en	Automatic Optimization

en	Modal optimization window.

en	Keep all visits in the same routes: you can choose to keep the same stops in a route. If you choose "no", the routing engine optimizes all the visit points according to your number of vehicles.

en	Put unchecked visits at the end of route: If "no", the unchecked visits keep their optimal place in the route.

en	Authorize delay for visit; can be modified on request to support

en	Router dimension: according to settings defined in the menu Vehicles > VehicleName ("Light Vehicle-shortest", "Heavy vehicles-Fastest, etc.)

en	Authorize delay for vehicle : can be modified on request to support

en	Force start vehicle early: can be modified on request to support

en	Authorize overload of deliverable unit (here, "m3") : according to the settings defined in Vehicles > Deliverable units and in each vehicle, Vehicle > VehicleName in the Capacities.

en	The “Optimization duration” information at the bottom of the modal window shows the minimum and maximum optimization calculation times. Those durations may be changed upon request to Support. Adjusting those durations may allow finer tuning of optimization results or time savings. Those durations are multiplied by the number of vehicles activated.

en	Optimize a route

en	If you want to optimize only one of your routes, you can click on the button |roue_crantee|.

en	For example, if you have 4 routes in your plan, you can optimize the route of your choice. This button is located above each of the routes. The operation is therefore possible for each of them.

en	Manual scheduling and automatic optimization systematically update the journey time and distances traveled.

en	Modale window during the optimization

en	Modale window during the optimization.

en	Two progress bars are displayed: 1. Distance calculation 2. Optimization

en	When the two progress bars are full, a third progress bar is displayed: Refresh the plan.

en	The optimization duration is stated in the bottom left of the window.

en	The |cancel_optimization_button| button can be used to stop any action and close this modal optimization window.

en	List of icons in the plan and routes box

en	Icons for actions and information on the plan including the routes :numref:`mapotempo_spread_out_plan_full-254x300`.

en	Deploy the plan panel.

en	Using the plan "Deploy" button |déployer|, you can display all the routes of your plan in full screen with the following view :numref:`spread_out_plan_full-1024x368`.

en	Plan deployed in full screen.

en	The routes are displayed with greater clarity. If you click on one of the stops, you can open a pop-up summarizing information about the stop (vehicle assigned, name of the point visited, address, time slot, schedule). To return to the standard view of the plan, click on the |déployer| button.

en	'\|minifier\ This button displays only the interactive map on the screen. To display the plan and the interactive map again you have to click again on the same button :numref:`icon_plan_routes_1-300x148`.''

en	Buttons in the route box.

en	|arrêt| 1188/1199 stops indicates the number of planned stops out of the total number of stops.

en	|vehicle| Indicates the number of vehicles used out of the total number of vehicles.

en	|horloge| 36:10 shows the duration of all the routes of the plan.

en	|icôneroute| Indicates the total distances to be covered on the plan routes.

en	|speedometer| Indicates the average speed of the whole routes

en	|emissioncarbone| Indicates the CO2 emissions of the plan routes if CO2 emissions and vehicle consumption have been filled in (see chapter "Vehicle management" in section "Vehicle settings").

en	|deliverable_unit| indicates the number of units delivered out of the total vehicle capacities.

en	|boutonoptimisation| Launches automatic optimization of all the routes or of individual routes in the plan. Optimization can be applied to all stops on the route or only to active stops on the route.

en	|visualisation| Allows you to view or hide all planned routes and stops.

en	|masquer| Activates if unplanned routes or stops are hidden on the plan and interactive map.

en	|verrouiller| Allows you to lock or unlock all plan routes and unplanned stops. If the routes are locked, they will not be affected by any changes. Optimization cannot modify a locked route.

en	The following icon |verrouverrouille| is activated over unplanned routes or stops that have been locked. It should be noted that locking allows manual movement of a point. (Example: moving a point from one route to another).

en	|boutonexport| Allows you to export the plan in different formats (see chapter "Export Routes").

en	|insertionmasse| Allows bulk assignment of unplanned stops with one click. If those stops are inserted in routes, those routes will no longer be optimized. The mass assignment of unplanned stops is limited to 20 stops. It is nevertheless recommended to use zoning to assign your stops more precisely (see chapter "Zoning Management").

en	Unplanned stops are sorted alphabetically and by number. In other words, stop names composed of letters are sorted alphabetically. If stop names are composed of numbers, the number will be taken into account for sorting. Example: "Home 1" will be ranked before "Home 9" :numref:`mapotempo_alphanumeric_order_600-240x300`.

en	Alphanumeric classification of unplanned stops.

en	Icons and action button related to the route.

en	The |pinceau| / |pastille| icon allows you to customize the color of the route (by default, the color of the route is that of the vehicle).

en	The |modifiervéhicule| icon displays the "Vehicle Settings" page.

en	The |bouton_optimisation_tournées| icon allows you to launch automatic optimization on the route of your choice.

en	The |verrouiller| icon allows to lock the route so that the global operations on the plan do not affect this route. For example, optimization will not alter the locked route. Manual modifications continue to be accepted. (E.g. moving stops to the list of unplanned stops or to another route).

en	The |boutonexport| icon allows you to export the route in different formats (description in the chapter "Export routes").

en	The |horloge| 4: 39/8: 00 icon shows the expected duration of the route, compared to the duration of the driver's activity (also known as the "Vehicle time windows").

en	The |icôneroute| icon indicates the distance to be covered on the route.

en	Information icons or actions on stops:

en	|numéro| indicates the position in the route; only the points visited are numbered.

en	|activation| enables the point to be taken into account or ignored when calculating the route. When the box is unchecked \|deactivation\|, the point is inactive. These inactive points will be taken into account during optimization depending on the type of optimization chosen.

en	The |visualiser| icon allows you to zoom in on the selected destination and display it with its information.

en	A number of additional features are provided for greater ease of use.

en	When optimization is launched (of all routes |boutonoptimisation| or of one route |bouton_optimisation_tournées|), a window opens. :numref:`modale_optim`

en	If unplanned visits are not locked |lock|, the optimization engine inserts the unplanned visits in the best place when optimization is launched, keeping the visits in the same routes.

en	Clicking on Optimize opens a new modal window. :numref:`modale_running_optim`

en	Pick-up and Delivery

en	On the map, visits which are linked to one another are shown with a link icon |link_icon|.

en	Optimization takes any links created into account. It puts visits linked to one another into the same routes.

en	If a visit is moved manually, the linked visits move with it.

en	If a delivery visit precedes its pick-up visit, a “Link between visits ignored” message is displayed along with a broken link icon |chain_broken_icon|.

en	Plan icons

en	Icons of each route

en	Whole-route actions and information icons :numref:`app-plannings-routes_icons`:

en	The |calendar_icon| / |calendar_check_icon| icon can be used to set the route date. The route date must be later than the plan date.

en	Force the route start time

en	Optimization calculates the best route possible, minimizing costs. Depending on constraints and requirements, optimization may suggest waiting times, delayed starts etc.

en	In Global settings, the vehicle start time can be forced. This function implies that the vehicle start time (Time amplitude) is respected. Each route leaves at the vehicle start time. If it is active, a pin icon |pin_icon| appears to the left of the start time of the route, which appears in a box.

en	To have a route start at the desired time, the route start time can be forced. Click on the start time and a field will open. The desired time must be entered in the format HH:mm. When it is set, the start time appears in a box and a pin icon |pin_icon| appears to its left. :numref:`route_force_start`

en	Force the route start time.

en	Stop icons

en	Once the plan is selected or created, an interactive map appears with your geocoded destinations. If no zoning is applied (1), your destinations appear as gray dots on the map (2) and "unplanned" in the dashboard on a red background (3) :numref:`planning_mapotempo_600`.

en	Applying zoning means that destinations can be linked automatically by zone, but the route is not optimized. You can reorder your routes manually (see `Ordonnancement manuel_`) or optimize them automatically (see `Optimisation automatique_`).

en	The |visualisation| icon makes it possible to hide or display the destination of the route on the map and on the plan.

en	The |modifier| icon enables you to display the "Edit destination" or "Edit store" page according to the type of point selected.

en	The |glisserdéposer| icon allows you to drag-and-drop to change the order of destinations in the routes.