en	Printable route sheets.

en	LV Europe

en	Save by clicking on the Update Global settings button |update_global_settings|.

en	In the Role field on the user settings page, the Reporting only role: :numref:`role_field_reporting_only`

en	User settings

en	LV satellite base map.

en	:numref:`blackwhite_base_map` :

en	The role is specified in the user settings. This is shown in brackets to the right of the account name. When nothing is shown in brackets to the right of the account name, all rights are open to the user.

en	Printing

en	The length of the vehicle is expressed in meters. It must be between 0 and 300 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Click on |sync_vehicles| to allocate a mobile device to a vehicle.

en	Praxedo

en	account configuration,

en	New password: enter your new password

en	Preferred unit

en	The “Preferred unit” drop-down menu allows you to choose which unit will be used (b) to express the route distance, either in Km (kilometers) or Miles. All distance data will be shown in the chosen unit.

en	For the shortest route, the system calculates the route covering the shortest possible distance.

en	It is possible to have the route starting or ending at the point furthest from the store (On) or to leave the optimization process to calculate.

en	Set up printing of the roadmap.

en	Delays at stops or to vehicle returns can be accepted (Off) or respected (On).

en	LV Israel

en	You can choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	Alyacom

en	The list of mobile devices is available from the page for each Vehicle. Allocate the appropriate mobile device directly in the Vehicle form.

en	The height of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Route

en	{PLANNING_REF} for the Plans reference,

en	Global Settings

en	If there is an error in the Login, Password, Intervention code for the start point, Intervention code for the stop point, Code for the material to deliver and the Code for the route, the box turns red.

en	In the account name, the Guest role: :numref:`account_name_guest`

en	Before you can send an SMS you will need to have filled in the Destinations’ mobile phone numbers (see Destination management).

en	Each vehicle can be set up using a different routing engine on its vehicle page (see section on Vehicle management).

en	They are sent to Mapotempo Live and can be found on mission sheets.

en	Optimization calculates the best route possible, minimizing costs. Depending on constraints and requirements, optimization may suggest waiting times, delayed starts etc.

en	Fill in the Username and API key provided by Mapotempo Support. When the Username and API key are completed correctly, the gray box will turn green. Vehicles can receive route data.

en	Link to global settings

en	If the **Include stop time** box is checked, stop times are shown in the column on the right of the table.

en	Destination addresses found in TomTom WebFleet can be imported directly from the Destination import page.

en	Sample URLs:

en	Praxedo Settings box.

en	output of your routes: media used to communicate route information.

en	Default country

en	This is the time zone used as the basis for planning and optimization calculations.

en	Tag

en	Set "Heavy Weights - Fastest"

en	Black & White map base.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Send an SMS to customers**.

en	The following page is displayed :numref:`app-global-settings-num-full`

en	Teksat

en	Configuring Mapotempo Live settings.

en	Vehicle

en	number of vehicles in your fleet,

en	Adjust the speed calculation. The speed for a cycle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	Global Settings.

en	{ROUTE_REF} for a route’s reference.

en	Simply fill in the field with the appropriate term. Save the global settings by clicking the button at the bottom of the page. :numref:`business_terms`

en	Business terms section

en	Fastest

en	In the Role field on the user settings page, the Guest role: :numref:`role_field_guest`

en	The pre-filled value corresponds to the initial term.

en	If there is an error in the Username or API key, the box turns red.

en	http://www.example.com?planning_ref={PLANNING_REF}&route_ref={ROUTE_REF}

en	For "Global Settings", click on the right menu and select "Global Settings" :numref:`app-global-settings-num2-full`.

en	Save the Global settings by clicking on the Update Global settings button |update_global_settings|.

en	If there is an error in the Account, Username or Password, the box turns red.

en	:numref:`limits`

en	Global Account

en	LV Pieces of World – HV World

en	All creation, editing and deletion is covered in the two levels of information.

en	your vehicle fleet details: the chosen routing engine and options,

en	If the **Include plan annotating** box is checked, there is a space for a signature to the right of the Destination line.

en	Notico Deliv’ settings box.

en	If you select Yes, the calculator includes motorways. If you select No, the calculator ignores motorways.

en	Vehicles limits

en	**Account**: your entity name,

en	LV Europe/France

en	Business terms

en	Mapbox Street Morocco

en	Despite the huge wealth of data found in Mapotempo, there is a possibility that, depending on your business, some additional fields might be needed; e.g. a cell phone field, visit type etc.

en	the fastest or shortest routes,

en	Export to **GPS navigation systems** is supported on the following mobile devices:

en	Routing engine

en	API Key

en	Callback URL

en	Custom attributes

en	Configuring callback URL settings.

en	Printable road sheets look like this: :numref:`app-plannings-my_planning-print-num-full`:

en	If you select Yes, the calculator uses motorways. If you select No, the calculator does not use motorways

en	Custom field in a blue box

en	To create a custom field, go to the Global settings page. :numref:`global_settings_link`

en	Mapotempo Live is a mobile application which assists you in working out routes for deliveries, collections, sales representatives, couriers etc. It may be linked to Mapotempo Web, which includes the vehicle settings, addresses to visit and optimized routes. :numref:`MapotempoLive`

en	Fill in the FTP server address, the directory on the FTP server, the User and the Password for your Notico Deliv’ account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Pedestrian

en	Configuring SMS settings.

en	Global and user settings

en	You can view the information related to the contract signed with Mapotempo (1):

en	Change your login and password

en	In the menu, for example :numref:`business_terms_menu`

en	Account name with Reporting only role.

en	If there is an error in the Username or Password, the box turns red.

en	When “Heavy goods vehicle” is chosen from the “Routing engine” drop-down menu, options specific to heavy goods vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`hwL`

en	TomTom WebFleet settings box.

en	To enable access according to role, contact support by phone (+33 (0)5 64 27 05 83) or by email (support@mapotempo.com).

en	TomTom WebFleet

en	:numref:`satellite_base_map` :

en	In the account name, the Reporting only role: :numref:`account_name_reporting_only`

en	Fill in the ID and API key for your Alyacom account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Base map

en	If this is checked, the calculator strictly enforces any exclusions. If it is not checked, exclusions will be ignored if it cannot find another way.

en	:numref:`mapnikfr_base_map` :

en	Fill in the Customer account, Username and Password for your Trimble account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	The URL click2call option, which can be activated on request by Support, calls the VOIP (Voice over Internet Protocol) service you use.

en	Cycle

en	Mapnik base map.

en	When “Pedestrian” is chosen from the “Route calculator” drop-down menu, options specific to pedestrians will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`pedestrian`

en	With one click, the Destination is called from the list of Destinations, the Destinations form and the Checkpoint popup in the Plan.

en	Delete a custom field

en	The new name appears in brackets alongside the standard term.

en	If you select Yes, the calculator uses toll sections. If you select No, the calculator does not use toll sections.

en	You can cancel the creation of a custom field by clicking the Cancel creation button |cancel_creation_button|.

en	:numref:`Masternaut`

en	Click on the Add a custom field button |add_custom_attributes_button|. Choose the page or section in the application where the field should appear:

en	Confirm.

en	In the “Outputs” section on the “Global settings” tab, open the “SMS” accordion menu. :numref:`SMS`:

en	Satellite

en	Indication of the **Number of vehicles**.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_shortest`

en	Five terms can be set:

en	Set the weight per axle. The weight per axle is the result of dividing the total weight of the vehicle by the number of axles, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	If there is an error in the Username or Password, the box turns red.

en	Store

en	Make your changes. The section or page to which it is linked cannot be edited.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Print**.

en	Click "Update" to save the change

en	Heavy goods vehicles

en	:numref:`Orange Fleet Performance`

en	Masternaut settings box.

en	SuiviDeFlotte

en	LV Morocco

en	When this box is checked, the “State” field is shown in Destination addresses. If it is unchecked, the “State” field will not be shown.

en	To manage a custom field, go to the Global settings page. A Custom fields section can be used to add, edit or delete a custom field. :numref:`custom_attributes`

en	Email: enter a new email to change email

en	Global Settings Account Information

en	:numref:`Trimble`

en	The app can be downloaded to smartphones and/or tablets for free in just a few seconds. The Mapotempo Live section describes how the app works.

en	general administration of a dealer account

en	The type of vehicle selected represents a fleet composed (mostly or entirely) of heavy goods vehicles, light vehicles, cycles or pedestrians.

en	The callback URL option can be activated upon request to Support. The callback URL generates the option of linking an external application to read data from routes or to synchronize them for other actions. :numref:`callback_url`

en	Access to User settings.

en	the account global settings page, in the Custom fields section.

en	Default values

en	The URL must pick up the {TEL} parameter from the phone number position. Here is an example of a click2call URL: http://www.fournisseurTelephoneIP.fr?tel=0102030405

en	When “Cycle” is chosen from the “Routing engine” drop-down menu, options specific to cycles (bikes, delivery tricycles, etc.) will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`cycleL`

en	LV Europe/France – HV

en	It cannot be edited or deleted.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to **ExternalApplicationName**.

en	Here base map

en	:numref:`Alyacom`

en	The SMS sender can be used to send the account name to the SMS recipient.

en	Fill in the Username and Password for your Masternaut account Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	One or more mobile device(s) will be linked upon request to Support. Sign-in boxes are displayed at the bottom of the “Global settings”.

en	Plan

en	This page allows you to change information set when you subscribed:

en	There are three types of account: 1. No role: the user has all rights 2. Guest: the user can read, view, display and hide all data present on the account. 3. Reporting only: the user can read and view reports and user settings.

en	Account name with Reporting only role.

en	Deliverable unit

en	To access the "User Settings" page, click on the right menu, then select "User Settings" :numref:`app-settings-user-num-600`.

en	Time zone

en	Edit a custom field

en	Business terms can be used to customize Mapotempo Web using the company’s own terminology.

en	WARNING: If vehicles are already set up, synchronizing will overwrite the data present in the Vehicles with the data present in the Teksat account.

en	Current password: enter your current password. *Without this information, you cannot change your password.*

en	:numref:`mapnik_base_map` :

en	When the custom field is linked to the Store, Route, Destination or Visit, it appears in the stop popup on the map.

en	You can adjust the speed calculation. The speed for a light vehicle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	:numref:`NoticoDeliv`

en	Custom fields section

en	Set "Cycle - Fastest"

en	LV Pieces of World

en	Mobile devices are devices installed on board vehicles or issued to drivers. :numref:`services-all-600_new`

en	Map backgrounds are updated regularly. Different map backgrounds are available, depending on the routing engine.

en	Mapnik-fr base map.

en	Alyacom Settings box.

en	This is the average time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	Routes are circulated by:

en	Base Israel

en	Change Global Settings.

en	`SMS`_,

en	All interfaceable mobile services

en	URL Click2Call

en	Fill in the name and URL of the external application. The URL can contain the following replace strings:

en	Fill in the Customer ID, URL, Username and Password for your Teksat account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Limits

en	Light vehicle

en	Mapnik

en	Teksat Global Settings.

en	Mapotempo Live

en	Orange Fleet Performance settings box.

en	`Printing`_ on paper,

en	On the Plans page, the Layers icon |layers_icon| allows you to switch temporarily to a different base map.

en	:numref:`optimization_settings`

en	iCal file export (for `Calendars`_),

en	An SMS has 160 characters. You can activate long SMS sending. Long SMS are billed at the price of multiple SMS. If the long SMS option is unchecked, only the first 160 characters are sent.

en	TomTom WEBFLEET

en	LV-HV World (Here)

en	At the bottom of the "User Settings" page, click "Change your login credentials and password"; the requested page is displayed: :numref:`app-settings_settings_settings_user-password-num-full`

en	SMS

en	Click on the Edit button |edit_button| to access the custom field sheet.

en	No setting is required to use this export.

en	Change your password.

en	Create custom fields

en	Role

en	Calendars

en	An API (Application Programming Interface) key is a code which enables different IT services to identify a program. It is provided for connection to various different applications.

en	Masternaut

en	:numref:`base_base_map`:

en	Shortest - Light vehicle

en	User

en	Fill in the Username and Password for your SuiviDeFlotte account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Shortest light vehicle route settings

en	User settings.

en	Custom fields can be managed from:

en	GPS navigation devices

en	If there is an error in the Customer account, Username or Password, the box turns red.

en	Base

en	Zoning

en	SuiviDeFlotte Settings box.

en	If forced start is active, the map shows the pin icon |pin_icon| to the left of the route start time.

en	Bêta LV-HV Europe/France (OSRM)

en	the different types of vehicle.

en	The settings page for the logged in user is displayed :numref:`app-settings_users`:

en	If there is an error in the Username or API key, the box turns red.

en	Notico Deliv'

en	When this button is checked, the “State” field is shown in Destination addresses.

en	The width of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Confirm password: re-enter your new password

en	Orange Fleet Performance

en	Each user has their own individual “User settings” to customize their interface, configure their login credentials etc.

en	HW satellite base map.

en	In the destinations list, for example :numref:`business_terms_destinationsList`

en	Available base maps

en	:numref:`SuiviDeFlotte`

en	Fill in the Login, Password, Intervention code for the start point, Intervention code for the stop point, the Code for the material to deliver and the Code for the route from your Praxedo account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Set the weight of the vehicle. The weight is of the vehicle including trailers and freight, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	:numref:`here_base_map` :

en	Time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	The vehicle start time can be forced. This function implies that the vehicle start time (Time amplitude) is respected. Each route leaves at the vehicle start time.

en	The mobility/GPS partner is activated upon request when subscribing or when purchasing a fleet of devices. Only activated services are displayed.

en	Base map

en	Reporting only role field.

en	The options you can adjust will vary according to your selection.

en	:numref:`Teksat`

en	The buttons to the right of items show whether optimization settings are active (On) or inactive (Off).

en	Bêta LV-HV World with trafic

en	Guest role field.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_fastest`

en	Name the new field. You can define a default value and help text so a correct value is entered in the field. For example: Create the pet field, set the default value as Dog and explain: “Enter the name of a pet. ”

en	Trimble

en	:numref:`satellite2_base_map` :

en	Trimble Settings box.

en	The iCal format enables you to export route timings and checkpoints to a calendar.

en	Visit

en	You can cancel any changes to a custom field by clicking the Cancel changes button |cancel_modification_button|.

en	A **route sheet** pdf output can be printed on paper.

en	Fill in the Username and Password for your Orange Fleet Performance account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	The drop-down **Routing engine** menu allows you to choose between:

en	Here

en	Set the number of articulated trailers being towed. The number must be between 0 and 4. You can use the arrows to the right of the field, or enter the required number directly.

en	{PLANNING_ID} for the Plans ID,

en	Global Settings include:

en	For the fastest route, the system calculates the fastest possible route in terms of time taken.

en	Mapnik-fr

en	{ROUTE_ID} for a route’s ID,

en	Destination

en	In "Output" section of the "Global Settings" tab, open the "Printing" accordion :numref:`site-app-num-full1`:

en	If the **Include map** box is checked, the route sheet shows a map below the header.

en	GPS file export (for `GPS navigation devices`_),

en	Choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	Click the Destroy button next to the custom field |trash_button|.

en	**SMS** sending is an option which can be activated upon request from Support. Additional billing is required.

en	:numref:`Praxedo`

en	Black & White

en	Routes Broadcasting Systems

en	Set "Light vehicle - Fastest"

en	:numref:`account`

en	If there is an error in the Username or Password, the box turns red.

en	route export to `Mapotempo Live`_.

en	Fill in the Account name, User and Password for your TomTomWebFleet account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Set up Mapotempo: password and login, type of fleet, average visit duration, export to GPS devices, export route plans

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to an **iCal calendar** or to send an **iCal calendar by email**.

en	WARNING: If the vehicles are set up, synchronization erase present datas in the vehicles with the present datas in the Orange Fleet Performance account.

en	Destinations

en	Enter the average time spent at each checkpoint. It will be applied to each Visit, but it can be adjusted for each individual Destination. The format is hours:minutes:seconds.

en	If you select Yes, the calculator includes toll sections. If you select No, the calculator ignores toll sections.

en	User settings

en	If there is an error in the FTP server address, FTP server directory, User or Password, the box turns red.

en	This is how the roles are shown in Mapotempo:

en	Set "Pedestrian - Fastest"

en	Vehicles configuration

en	If requested from Support, barcodes can be generated for each checkpoint. They will be shown beneath the name of the checkpoint. Barcodes are generated from the Destination reference.

en	http://www.example.com?p_id={PLANNING_ID}

en	The Custom field appears in a blue box. :numref:`created_custom_attributes`

en	:numref:`TomTomWebFleet`

en	If the speed of xx km/h is not appropriate for your vehicles, you can adjust it. The adjustment is expressed as a percentage; a setting of more than 100% indicates a faster vehicle, and vice versa.

en	**End subscription**: anniversary date on which your service contract ends.

en	From the “Base Map” drop-down menu, choose your preferred background map.

en	To manage a business term, go to the Global settings page. The Business terms section can be used to add or edit one or more business terms.