en	The drop-down **Routing engine** menu allows you to choose between:

en	Printable road sheets look like this: :numref:`app-plannings-my_planning-print-num-full`:

en	:numref:`account`

en	From the “Base Map” drop-down menu, choose your preferred background map.

en	Business terms can be used to customize Mapotempo Web using the company’s own terminology.

en	Global Settings.

en	:numref:`here_base_map` :

en	Base

en	Routing engine

en	When “Pedestrian” is chosen from the “Route calculator” drop-down menu, options specific to pedestrians will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`pedestrian`

en	Click on the Add a custom field button |add_custom_attributes_button|. Choose the page or section in the application where the field should appear:

en	Fill in the name and URL of the external application. The URL can contain the following replace strings:

en	Cycle

en	Make your changes. The section or page to which it is linked cannot be edited.

en	Base Israel

en	The app can be downloaded to smartphones and/or tablets for free in just a few seconds. The Mapotempo Live section describes how the app works.

en	If there is an error in the FTP server address, FTP server directory, User or Password, the box turns red.

en	If the speed of xx km/h is not appropriate for your vehicles, you can adjust it. The adjustment is expressed as a percentage; a setting of more than 100% indicates a faster vehicle, and vice versa.

en	If you select Yes, the calculator uses motorways. If you select No, the calculator does not use motorways

en	Five terms can be set:

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Send an SMS to customers**.

en	Map backgrounds are updated regularly. Different map backgrounds are available, depending on the routing engine.

en	Praxedo

en	Fill in the FTP server address, the directory on the FTP server, the User and the Password for your Notico Deliv’ account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Configuring SMS settings.

en	The URL click2call option, which can be activated on request by Support, calls the VOIP (Voice over Internet Protocol) service you use.

en	Deliverable unit

en	Global Settings Account Information

en	SuiviDeFlotte Settings box.

en	Mapnik base map.

en	The Custom field appears in a blue box. :numref:`created_custom_attributes`

en	Mapotempo Live

en	Mapotempo Live is a mobile application which assists you in working out routes for deliveries, collections, sales representatives, couriers etc. It may be linked to Mapotempo Web, which includes the vehicle settings, addresses to visit and optimized routes. :numref:`MapotempoLive`

en	SuiviDeFlotte

en	No setting is required to use this export.

en	Vehicle

en	When “Cycle” is chosen from the “Routing engine” drop-down menu, options specific to cycles (bikes, delivery tricycles, etc.) will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`cycleL`

en	`Printing`_ on paper,

en	Click on |sync_vehicles| to allocate a mobile device to a vehicle.

en	With one click, the Destination is called from the list of Destinations, the Destinations form and the Checkpoint popup in the Plan.

en	Bêta LV-HV World with trafic

en	The vehicle start time can be forced. This function implies that the vehicle start time (Time amplitude) is respected. Each route leaves at the vehicle start time.

en	Here base map

en	Light vehicle

en	Tag

en	Fill in the Login, Password, Intervention code for the start point, Intervention code for the stop point, the Code for the material to deliver and the Code for the route from your Praxedo account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	If forced start is active, the map shows the pin icon |pin_icon| to the left of the route start time.

en	URL Click2Call

en	If the **Include stop time** box is checked, stop times are shown in the column on the right of the table.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to **ExternalApplicationName**.

en	Destination addresses found in TomTom WebFleet can be imported directly from the Destination import page.

en	Account name with Reporting only role.

en	Mapnik-fr base map.

en	Time zone

en	Masternaut settings box.

en	WARNING: If the vehicles are set up, synchronization erase present datas in the vehicles with the present datas in the Orange Fleet Performance account.

en	{ROUTE_REF} for a route’s reference.

en	You can choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	There are three types of account: 1. No role: the user has all rights 2. Guest: the user can read, view, display and hide all data present on the account. 3. Reporting only: the user can read and view reports and user settings.

en	The pre-filled value corresponds to the initial term.

en	Change Global Settings.

en	:numref:`Masternaut`

en	Set up printing of the roadmap.

en	In "Output" section of the "Global Settings" tab, open the "Printing" accordion :numref:`site-app-num-full1`:

en	In the account name, the Guest role: :numref:`account_name_guest`

en	To access the "User Settings" page, click on the right menu, then select "User Settings" :numref:`app-settings-user-num-600`.

en	account configuration,

en	In the menu, for example :numref:`business_terms_menu`

en	The role is specified in the user settings. This is shown in brackets to the right of the account name. When nothing is shown in brackets to the right of the account name, all rights are open to the user.

en	Fill in the Username and Password for your SuiviDeFlotte account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	If there is an error in the Username or Password, the box turns red.

en	Configuring callback URL settings.

en	Base map

en	Set the number of articulated trailers being towed. The number must be between 0 and 4. You can use the arrows to the right of the field, or enter the required number directly.

en	User settings

en	http://www.example.com?p_id={PLANNING_ID}

en	At the bottom of the "User Settings" page, click "Change your login credentials and password"; the requested page is displayed: :numref:`app-settings_settings_settings_user-password-num-full`

en	The callback URL option can be activated upon request to Support. The callback URL generates the option of linking an external application to read data from routes or to synchronize them for other actions. :numref:`callback_url`

en	An SMS has 160 characters. You can activate long SMS sending. Long SMS are billed at the price of multiple SMS. If the long SMS option is unchecked, only the first 160 characters are sent.

en	Role

en	Trimble Settings box.

en	`SMS`_,

en	Default country

en	User settings

en	Global Settings

en	Callback URL

en	When this box is checked, the “State” field is shown in Destination addresses. If it is unchecked, the “State” field will not be shown.

en	Set "Pedestrian - Fastest"

en	User

en	If the **Include map** box is checked, the route sheet shows a map below the header.

en	The list of mobile devices is available from the page for each Vehicle. Allocate the appropriate mobile device directly in the Vehicle form.

en	Global and user settings

en	If there is an error in the Username or API key, the box turns red.

en	Save the Global settings by clicking on the Update Global settings button |update_global_settings|.

en	:numref:`SuiviDeFlotte`

en	If there is an error in the Username or API key, the box turns red.

en	:numref:`TomTomWebFleet`

en	:numref:`Alyacom`

en	SMS

en	Fill in the Customer ID, URL, Username and Password for your Teksat account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	:numref:`mapnikfr_base_map` :

en	This is the time zone used as the basis for planning and optimization calculations.

en	One or more mobile device(s) will be linked upon request to Support. Sign-in boxes are displayed at the bottom of the “Global settings”.

en	:numref:`base_base_map`:

en	Adjust the speed calculation. The speed for a cycle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	Save by clicking on the Update Global settings button |update_global_settings|.

en	Business terms section

en	iCal file export (for `Calendars`_),

en	Masternaut

en	TomTom WebFleet

en	Alyacom

en	Custom attributes

en	Mapnik-fr

en	LV-HV World (Here)

en	route export to `Mapotempo Live`_.

en	The options you can adjust will vary according to your selection.

en	{ROUTE_ID} for a route’s ID,

en	The width of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	This page allows you to change information set when you subscribed:

en	Click the Destroy button next to the custom field |trash_button|.

en	Black & White

en	http://www.example.com?planning_ref={PLANNING_REF}&route_ref={ROUTE_REF}

en	Route

en	LV Pieces of World

en	If there is an error in the Username or Password, the box turns red.

en	:numref:`Praxedo`

en	Routes Broadcasting Systems

en	Simply fill in the field with the appropriate term. Save the global settings by clicking the button at the bottom of the page. :numref:`business_terms`

en	The iCal format enables you to export route timings and checkpoints to a calendar.

en	Confirm password: re-enter your new password

en	Visit

en	Click "Update" to save the change

en	WARNING: If vehicles are already set up, synchronizing will overwrite the data present in the Vehicles with the data present in the Teksat account.

en	Delete a custom field

en	Custom fields can be managed from:

en	They are sent to Mapotempo Live and can be found on mission sheets.

en	Each user has their own individual “User settings” to customize their interface, configure their login credentials etc.

en	:numref:`mapnik_base_map` :

en	LV satellite base map.

en	In the account name, the Reporting only role: :numref:`account_name_reporting_only`

en	the different types of vehicle.

en	LV Europe

en	general administration of a dealer account

en	It is possible to have the route starting or ending at the point furthest from the store (On) or to leave the optimization process to calculate.

en	Configuring Mapotempo Live settings.

en	Set "Heavy Weights - Fastest"

en	A **route sheet** pdf output can be printed on paper.

en	Edit a custom field

en	Preferred unit

en	Custom field in a blue box

en	Heavy goods vehicles

en	The height of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Set the weight of the vehicle. The weight is of the vehicle including trailers and freight, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	**SMS** sending is an option which can be activated upon request from Support. Additional billing is required.

en	Routes are circulated by:

en	Export to **GPS navigation systems** is supported on the following mobile devices:

en	LV Europe/France – HV

en	:numref:`satellite_base_map` :

en	your vehicle fleet details: the chosen routing engine and options,

en	API Key

en	Zoning

en	Sample URLs:

en	Change your login and password

en	The “Preferred unit” drop-down menu allows you to choose which unit will be used (b) to express the route distance, either in Km (kilometers) or Miles. All distance data will be shown in the chosen unit.

en	To manage a business term, go to the Global settings page. The Business terms section can be used to add or edit one or more business terms.

en	The URL must pick up the {TEL} parameter from the phone number position. Here is an example of a click2call URL: http://www.fournisseurTelephoneIP.fr?tel=0102030405

en	Email: enter a new email to change email

en	GPS navigation devices

en	Guest role field.

en	Fastest

en	On the Plans page, the Layers icon |layers_icon| allows you to switch temporarily to a different base map.

en	output of your routes: media used to communicate route information.

en	Printable route sheets.

en	You can cancel the creation of a custom field by clicking the Cancel creation button |cancel_creation_button|.

en	Global Account

en	Printing

en	To enable access according to role, contact support by phone (+33 (0)5 64 27 05 83) or by email (support@mapotempo.com).

en	Despite the huge wealth of data found in Mapotempo, there is a possibility that, depending on your business, some additional fields might be needed; e.g. a cell phone field, visit type etc.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_shortest`

en	Confirm.

en	Base map

en	Notico Deliv’ settings box.

en	Orange Fleet Performance

en	**End subscription**: anniversary date on which your service contract ends.

en	Each vehicle can be set up using a different routing engine on its vehicle page (see section on Vehicle management).

en	:numref:`Teksat`

en	The buttons to the right of items show whether optimization settings are active (On) or inactive (Off).

en	In the Role field on the user settings page, the Guest role: :numref:`role_field_guest`

en	The type of vehicle selected represents a fleet composed (mostly or entirely) of heavy goods vehicles, light vehicles, cycles or pedestrians.

en	**Account**: your entity name,

en	Fill in the Username and Password for your Masternaut account Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	In the “Outputs” section on the “Global settings” tab, open the “SMS” accordion menu. :numref:`SMS`:

en	To create a custom field, go to the Global settings page. :numref:`global_settings_link`

en	Fill in the ID and API key for your Alyacom account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_fastest`

en	If this is checked, the calculator strictly enforces any exclusions. If it is not checked, exclusions will be ignored if it cannot find another way.

en	Trimble

en	Here

en	Black & White map base.

en	Bêta LV-HV Europe/France (OSRM)

en	LV Europe/France

en	When the custom field is linked to the Store, Route, Destination or Visit, it appears in the stop popup on the map.

en	The length of the vehicle is expressed in meters. It must be between 0 and 300 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Set the weight per axle. The weight per axle is the result of dividing the total weight of the vehicle by the number of axles, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	HW satellite base map.

en	Mapbox Street Morocco

en	Fill in the Account name, User and Password for your TomTomWebFleet account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	number of vehicles in your fleet,

en	An API (Application Programming Interface) key is a code which enables different IT services to identify a program. It is provided for connection to various different applications.

en	For "Global Settings", click on the right menu and select "Global Settings" :numref:`app-global-settings-num2-full`.

en	When this button is checked, the “State” field is shown in Destination addresses.

en	Optimization calculates the best route possible, minimizing costs. Depending on constraints and requirements, optimization may suggest waiting times, delayed starts etc.

en	the account global settings page, in the Custom fields section.

en	If there is an error in the Username or Password, the box turns red.

en	TomTom WEBFLEET

en	Praxedo Settings box.

en	Shortest - Light vehicle

en	For the fastest route, the system calculates the fastest possible route in terms of time taken.

en	All interfaceable mobile services

en	:numref:`limits`

en	Notico Deliv'

en	Plan

en	Create custom fields

en	GPS file export (for `GPS navigation devices`_),

en	Destinations

en	If requested from Support, barcodes can be generated for each checkpoint. They will be shown beneath the name of the checkpoint. Barcodes are generated from the Destination reference.

en	Access to User settings.

en	Account name with Reporting only role.

en	:numref:`NoticoDeliv`

en	If there is an error in the Account, Username or Password, the box turns red.

en	In the Role field on the user settings page, the Reporting only role: :numref:`role_field_reporting_only`

en	If you select Yes, the calculator includes motorways. If you select No, the calculator ignores motorways.

en	All creation, editing and deletion is covered in the two levels of information.

en	You can view the information related to the contract signed with Mapotempo (1):

en	Reporting only role field.

en	The mobility/GPS partner is activated upon request when subscribing or when purchasing a fleet of devices. Only activated services are displayed.

en	Satellite

en	Set up Mapotempo: password and login, type of fleet, average visit duration, export to GPS devices, export route plans

en	Set "Cycle - Fastest"

en	LV Morocco

en	:numref:`Trimble`

en	Enter the average time spent at each checkpoint. It will be applied to each Visit, but it can be adjusted for each individual Destination. The format is hours:minutes:seconds.

en	Calendars

en	:numref:`blackwhite_base_map` :

en	Fill in the Customer account, Username and Password for your Trimble account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	LV Pieces of World – HV World

en	Change your password.

en	Orange Fleet Performance settings box.

en	{PLANNING_REF} for the Plans reference,

en	Pedestrian

en	TomTom WebFleet settings box.

en	Fill in the Username and API key provided by Mapotempo Support. When the Username and API key are completed correctly, the gray box will turn green. Vehicles can receive route data.

en	Current password: enter your current password. *Without this information, you cannot change your password.*

en	Fill in the Username and Password for your Orange Fleet Performance account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	If there is an error in the Customer account, Username or Password, the box turns red.

en	When “Heavy goods vehicle” is chosen from the “Routing engine” drop-down menu, options specific to heavy goods vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`hwL`

en	In the destinations list, for example :numref:`business_terms_destinationsList`

en	Mobile devices are devices installed on board vehicles or issued to drivers. :numref:`services-all-600_new`

en	You can cancel any changes to a custom field by clicking the Cancel changes button |cancel_modification_button|.

en	Delays at stops or to vehicle returns can be accepted (Off) or respected (On).

en	If there is an error in the Login, Password, Intervention code for the start point, Intervention code for the stop point, Code for the material to deliver and the Code for the route, the box turns red.

en	Set "Light vehicle - Fastest"

en	User settings.

en	the fastest or shortest routes,

en	{PLANNING_ID} for the Plans ID,

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Print**.

en	Indication of the **Number of vehicles**.

en	Name the new field. You can define a default value and help text so a correct value is entered in the field. For example: Create the pet field, set the default value as Dog and explain: “Enter the name of a pet. ”

en	:numref:`Orange Fleet Performance`

en	New password: enter your new password

en	The settings page for the logged in user is displayed :numref:`app-settings_users`:

en	Link to global settings

en	Vehicles configuration

en	:numref:`satellite2_base_map` :

en	Shortest light vehicle route settings

en	Store

en	The new name appears in brackets alongside the standard term.

en	To manage a custom field, go to the Global settings page. A Custom fields section can be used to add, edit or delete a custom field. :numref:`custom_attributes`

en	Teksat

en	LV Israel

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to an **iCal calendar** or to send an **iCal calendar by email**.

en	Business terms

en	For the shortest route, the system calculates the route covering the shortest possible distance.

en	Custom fields section

en	:numref:`optimization_settings`

en	Alyacom Settings box.

en	Limits

en	Mapnik

en	It cannot be edited or deleted.

en	Global Settings include:

en	This is how the roles are shown in Mapotempo:

en	Vehicles limits

en	If you select Yes, the calculator includes toll sections. If you select No, the calculator ignores toll sections.

en	You can adjust the speed calculation. The speed for a light vehicle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	Before you can send an SMS you will need to have filled in the Destinations’ mobile phone numbers (see Destination management).

en	This is the average time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	Default values

en	The following page is displayed :numref:`app-global-settings-num-full`

en	Destination

en	Teksat Global Settings.

en	If the **Include plan annotating** box is checked, there is a space for a signature to the right of the Destination line.

en	Available base maps

en	Click on the Edit button |edit_button| to access the custom field sheet.

en	If you select Yes, the calculator uses toll sections. If you select No, the calculator does not use toll sections.

en	The SMS sender can be used to send the account name to the SMS recipient.