en	Vehicle

en	Limits

en	Bêta LV-HV World with trafic

en	This is the time zone used as the basis for planning and optimization calculations.

en	{PLANNING_ID} for the Plans ID,

en	When this button is checked, the “State” field is shown in Destination addresses.

en	When this box is checked, the “State” field is shown in Destination addresses. If it is unchecked, the “State” field will not be shown.

en	The length of the vehicle is expressed in meters. It must be between 0 and 300 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Heavy goods vehicles

en	The pre-filled value corresponds to the initial term.

en	Account name with Reporting only role.

en	Black & White map base.

en	HW satellite base map.

en	Click "Update" to save the change

en	All creation, editing and deletion is covered in the two levels of information.

en	LV satellite base map.

en	Export to **GPS navigation systems** is supported on the following mobile devices:

en	Each vehicle can be set up using a different routing engine on its vehicle page (see section on Vehicle management).

en	Configuring callback URL settings.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to an **iCal calendar** or to send an **iCal calendar by email**.

en	At the bottom of the "User Settings" page, click "Change your login credentials and password"; the requested page is displayed: :numref:`app-settings_settings_settings_user-password-num-full`

en	Business terms section

en	Masternaut settings box.

en	If you select Yes, the calculator includes toll sections. If you select No, the calculator ignores toll sections.

en	To manage a custom field, go to the Global settings page. A Custom fields section can be used to add, edit or delete a custom field. :numref:`custom_attributes`

en	For the fastest route, the system calculates the fastest possible route in terms of time taken.

en	If there is an error in the Username or Password, the box turns red.

en	Account name with Reporting only role.

en	If there is an error in the Username or Password, the box turns red.

en	:numref:`limits`

en	To enable access according to role, contact support by phone (+33 (0)5 64 27 05 83) or by email (support@mapotempo.com).

en	Deliverable unit

en	Printable route sheets.

en	If the **Include plan annotating** box is checked, there is a space for a signature to the right of the Destination line.

en	It cannot be edited or deleted.

en	The iCal format enables you to export route timings and checkpoints to a calendar.

en	Set the weight of the vehicle. The weight is of the vehicle including trailers and freight, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	Light vehicle

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Print**.

en	From the “Base Map” drop-down menu, choose your preferred background map.

en	TomTom WEBFLEET

en	Reporting only role field.

en	No setting is required to use this export.

en	Default values

en	Fill in the Account name, User and Password for your TomTomWebFleet account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Global Settings include:

en	You can cancel any changes to a custom field by clicking the Cancel changes button |cancel_modification_button|.

en	:numref:`Praxedo`

en	When “Cycle” is chosen from the “Routing engine” drop-down menu, options specific to cycles (bikes, delivery tricycles, etc.) will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`cycleL`

en	The vehicle start time can be forced. This function implies that the vehicle start time (Time amplitude) is respected. Each route leaves at the vehicle start time.

en	Set "Heavy Weights - Fastest"

en	Sample URLs:

en	http://www.example.com?p_id={PLANNING_ID}

en	:numref:`SuiviDeFlotte`

en	Mapnik base map.

en	number of vehicles in your fleet,

en	Mapbox Street Morocco

en	In the account name, the Reporting only role: :numref:`account_name_reporting_only`

en	Global Account

en	Fill in the Login, Password, Intervention code for the start point, Intervention code for the stop point, the Code for the material to deliver and the Code for the route from your Praxedo account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Notico Deliv'

en	Fill in the Username and API key provided by Mapotempo Support. When the Username and API key are completed correctly, the gray box will turn green. Vehicles can receive route data.

en	Destination

en	Confirm password: re-enter your new password

en	Role

en	Route

en	:numref:`Teksat`

en	If this is checked, the calculator strictly enforces any exclusions. If it is not checked, exclusions will be ignored if it cannot find another way.

en	Adjust the speed calculation. The speed for a cycle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	Alyacom Settings box.

en	If forced start is active, the map shows the pin icon |pin_icon| to the left of the route start time.

en	In the “Outputs” section on the “Global settings” tab, open the “SMS” accordion menu. :numref:`SMS`:

en	The list of mobile devices is available from the page for each Vehicle. Allocate the appropriate mobile device directly in the Vehicle form.

en	Map backgrounds are updated regularly. Different map backgrounds are available, depending on the routing engine.

en	Mapnik-fr base map.

en	Business terms

en	Vehicles limits

en	Base map

en	LV Morocco

en	:numref:`here_base_map` :

en	The settings page for the logged in user is displayed :numref:`app-settings_users`:

en	The options you can adjust will vary according to your selection.

en	If the speed of xx km/h is not appropriate for your vehicles, you can adjust it. The adjustment is expressed as a percentage; a setting of more than 100% indicates a faster vehicle, and vice versa.

en	The following page is displayed :numref:`app-global-settings-num-full`

en	The new name appears in brackets alongside the standard term.

en	Black & White

en	The URL click2call option, which can be activated on request by Support, calls the VOIP (Voice over Internet Protocol) service you use.

en	Zoning

en	In the Role field on the user settings page, the Reporting only role: :numref:`role_field_reporting_only`

en	The mobility/GPS partner is activated upon request when subscribing or when purchasing a fleet of devices. Only activated services are displayed.

en	Plan

en	:numref:`base_base_map`:

en	To access the "User Settings" page, click on the right menu, then select "User Settings" :numref:`app-settings-user-num-600`.

en	Available base maps

en	There are three types of account: 1. No role: the user has all rights 2. Guest: the user can read, view, display and hide all data present on the account. 3. Reporting only: the user can read and view reports and user settings.

en	`Printing`_ on paper,

en	Fill in the Username and Password for your SuiviDeFlotte account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	:numref:`account`

en	Callback URL

en	:numref:`blackwhite_base_map` :

en	:numref:`Orange Fleet Performance`

en	Base Israel

en	Printing

en	If there is an error in the Customer account, Username or Password, the box turns red.

en	Fill in the name and URL of the external application. The URL can contain the following replace strings:

en	Fill in the Username and Password for your Orange Fleet Performance account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	:numref:`TomTomWebFleet`

en	Guest role field.

en	Five terms can be set:

en	This is how the roles are shown in Mapotempo:

en	If you select Yes, the calculator uses toll sections. If you select No, the calculator does not use toll sections.

en	When the custom field is linked to the Store, Route, Destination or Visit, it appears in the stop popup on the map.

en	Set "Pedestrian - Fastest"

en	Praxedo

en	The type of vehicle selected represents a fleet composed (mostly or entirely) of heavy goods vehicles, light vehicles, cycles or pedestrians.

en	In "Output" section of the "Global Settings" tab, open the "Printing" accordion :numref:`site-app-num-full1`:

en	Routes are circulated by:

en	general administration of a dealer account

en	Fill in the FTP server address, the directory on the FTP server, the User and the Password for your Notico Deliv’ account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	If requested from Support, barcodes can be generated for each checkpoint. They will be shown beneath the name of the checkpoint. Barcodes are generated from the Destination reference.

en	You can cancel the creation of a custom field by clicking the Cancel creation button |cancel_creation_button|.

en	:numref:`Masternaut`

en	SuiviDeFlotte Settings box.

en	An SMS has 160 characters. You can activate long SMS sending. Long SMS are billed at the price of multiple SMS. If the long SMS option is unchecked, only the first 160 characters are sent.

en	Tag

en	**SMS** sending is an option which can be activated upon request from Support. Additional billing is required.

en	Shortest - Light vehicle

en	WARNING: If vehicles are already set up, synchronizing will overwrite the data present in the Vehicles with the data present in the Teksat account.

en	User settings.

en	Time zone

en	The callback URL option can be activated upon request to Support. The callback URL generates the option of linking an external application to read data from routes or to synchronize them for other actions. :numref:`callback_url`

en	Set the weight per axle. The weight per axle is the result of dividing the total weight of the vehicle by the number of axles, and is expressed in metric tons. It must be between 0 and 1000 metric tons. You can use the arrows to the right of the field, or enter the required number directly.

en	Here base map

en	Choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	Masternaut

en	Praxedo Settings box.

en	Preferred unit

en	Custom fields section

en	Click on the Edit button |edit_button| to access the custom field sheet.

en	Click on the Add a custom field button |add_custom_attributes_button|. Choose the page or section in the application where the field should appear:

en	`SMS`_,

en	When “Heavy goods vehicle” is chosen from the “Routing engine” drop-down menu, options specific to heavy goods vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`hwL`

en	Cycle

en	If the **Include map** box is checked, the route sheet shows a map below the header.

en	Custom field in a blue box

en	Set up Mapotempo: password and login, type of fleet, average visit duration, export to GPS devices, export route plans

en	the different types of vehicle.

en	In the account name, the Guest role: :numref:`account_name_guest`

en	If the **Include stop time** box is checked, stop times are shown in the column on the right of the table.

en	Business terms can be used to customize Mapotempo Web using the company’s own terminology.

en	In the menu, for example :numref:`business_terms_menu`

en	SMS

en	For "Global Settings", click on the right menu and select "Global Settings" :numref:`app-global-settings-num2-full`.

en	Satellite

en	Simply fill in the field with the appropriate term. Save the global settings by clicking the button at the bottom of the page. :numref:`business_terms`

en	**Account**: your entity name,

en	Set "Light vehicle - Fastest"

en	If there is an error in the Login, Password, Intervention code for the start point, Intervention code for the stop point, Code for the material to deliver and the Code for the route, the box turns red.

en	Custom attributes

en	To create a custom field, go to the Global settings page. :numref:`global_settings_link`

en	Destination addresses found in TomTom WebFleet can be imported directly from the Destination import page.

en	User

en	Email: enter a new email to change email

en	:numref:`satellite_base_map` :

en	Save the Global settings by clicking on the Update Global settings button |update_global_settings|.

en	SuiviDeFlotte

en	{PLANNING_REF} for the Plans reference,

en	On the Plans page, the Layers icon |layers_icon| allows you to switch temporarily to a different base map.

en	{ROUTE_REF} for a route’s reference.

en	Mapotempo Live is a mobile application which assists you in working out routes for deliveries, collections, sales representatives, couriers etc. It may be linked to Mapotempo Web, which includes the vehicle settings, addresses to visit and optimized routes. :numref:`MapotempoLive`

en	Destinations

en	Access to User settings.

en	User settings

en	Set the number of articulated trailers being towed. The number must be between 0 and 4. You can use the arrows to the right of the field, or enter the required number directly.

en	**End subscription**: anniversary date on which your service contract ends.

en	The role is specified in the user settings. This is shown in brackets to the right of the account name. When nothing is shown in brackets to the right of the account name, all rights are open to the user.

en	Link to global settings

en	:numref:`mapnikfr_base_map` :

en	Shortest light vehicle route settings

en	LV Europe

en	Change your password.

en	The app can be downloaded to smartphones and/or tablets for free in just a few seconds. The Mapotempo Live section describes how the app works.

en	One or more mobile device(s) will be linked upon request to Support. Sign-in boxes are displayed at the bottom of the “Global settings”.

en	GPS navigation devices

en	Delays at stops or to vehicle returns can be accepted (Off) or respected (On).

en	Alyacom

en	Confirm.

en	Save by clicking on the Update Global settings button |update_global_settings|.

en	API Key

en	If there is an error in the Username or API key, the box turns red.

en	You can choose to arrive at or leave a checkpoint in the current direction of traffic; or you can ignore the traffic direction when calculating the route.

en	Routes Broadcasting Systems

en	If you select Yes, the calculator includes motorways. If you select No, the calculator ignores motorways.

en	All interfaceable mobile services

en	Teksat

en	{ROUTE_ID} for a route’s ID,

en	Set up printing of the roadmap.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_fastest`

en	account configuration,

en	If you select Yes, the calculator uses motorways. If you select No, the calculator does not use motorways

en	Mapnik-fr

en	Despite the huge wealth of data found in Mapotempo, there is a possibility that, depending on your business, some additional fields might be needed; e.g. a cell phone field, visit type etc.

en	Global Settings Account Information

en	WARNING: If the vehicles are set up, synchronization erase present datas in the vehicles with the present datas in the Orange Fleet Performance account.

en	LV-HV World (Here)

en	Optimization calculates the best route possible, minimizing costs. Depending on constraints and requirements, optimization may suggest waiting times, delayed starts etc.

en	Change Global Settings.

en	output of your routes: media used to communicate route information.

en	A **route sheet** pdf output can be printed on paper.

en	Indication of the **Number of vehicles**.

en	the fastest or shortest routes,

en	Calendars

en	route export to `Mapotempo Live`_.

en	Visit

en	The drop-down **Routing engine** menu allows you to choose between:

en	GPS file export (for `GPS navigation devices`_),

en	Configuring Mapotempo Live settings.

en	Make your changes. The section or page to which it is linked cannot be edited.

en	Teksat Global Settings.

en	The width of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	This page allows you to change information set when you subscribed:

en	Change your login and password

en	Global Settings

en	Custom fields can be managed from:

en	Printable road sheets look like this: :numref:`app-plannings-my_planning-print-num-full`:

en	:numref:`Trimble`

en	Trimble Settings box.

en	Fill in the Customer ID, URL, Username and Password for your Teksat account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	:numref:`optimization_settings`

en	your vehicle fleet details: the chosen routing engine and options,

en	User settings

en	Pedestrian

en	Here

en	Configuring SMS settings.

en	Vehicles configuration

en	This is the average time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	Set "Cycle - Fastest"

en	Fastest

en	With one click, the Destination is called from the list of Destinations, the Destinations form and the Checkpoint popup in the Plan.

en	The “Preferred unit” drop-down menu allows you to choose which unit will be used (b) to express the route distance, either in Km (kilometers) or Miles. All distance data will be shown in the chosen unit.

en	Routing engine

en	Mapotempo Live

en	In the destinations list, for example :numref:`business_terms_destinationsList`

en	:numref:`mapnik_base_map` :

en	iCal file export (for `Calendars`_),

en	The URL must pick up the {TEL} parameter from the phone number position. Here is an example of a click2call URL: http://www.fournisseurTelephoneIP.fr?tel=0102030405

en	Store

en	Base map

en	The SMS sender can be used to send the account name to the SMS recipient.

en	If there is an error in the Username or Password, the box turns red.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to **Send an SMS to customers**.

en	New password: enter your new password

en	Orange Fleet Performance settings box.

en	For the shortest route, the system calculates the route covering the shortest possible distance.

en	Enter the average time spent at each checkpoint. It will be applied to each Visit, but it can be adjusted for each individual Destination. The format is hours:minutes:seconds.

en	The Custom field appears in a blue box. :numref:`created_custom_attributes`

en	Fill in the Username and Password for your Masternaut account Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	In the Role field on the user settings page, the Guest role: :numref:`role_field_guest`

en	Fill in the ID and API key for your Alyacom account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	Click the Destroy button next to the custom field |trash_button|.

en	From the Plans page, clicking on the export icon |button_export| gives you the option to export to **ExternalApplicationName**.

en	LV Pieces of World – HV World

en	You can view the information related to the contract signed with Mapotempo (1):

en	To manage a business term, go to the Global settings page. The Business terms section can be used to add or edit one or more business terms.

en	Notico Deliv’ settings box.

en	Name the new field. You can define a default value and help text so a correct value is entered in the field. For example: Create the pet field, set the default value as Dog and explain: “Enter the name of a pet. ”

en	Global Settings.

en	Bêta LV-HV Europe/France (OSRM)

en	Before you can send an SMS you will need to have filled in the Destinations’ mobile phone numbers (see Destination management).

en	Delete a custom field

en	LV Europe/France

en	Time allotted to each checkpoint on the route. The Visit duration shown will be applied as the default visit duration. It can be adjusted for each individual Destination.

en	TomTom WebFleet settings box.

en	An API (Application Programming Interface) key is a code which enables different IT services to identify a program. It is provided for connection to various different applications.

en	If there is an error in the Account, Username or Password, the box turns red.

en	Global and user settings

en	Default country

en	:numref:`NoticoDeliv`

en	It is possible to have the route starting or ending at the point furthest from the store (On) or to leave the optimization process to calculate.

en	:numref:`Alyacom`

en	You can adjust the speed calculation. The speed for a light vehicle is an average of 18 km/h. The Speed multiplier, expressed as a percentage, adapts that average speed to your speed on the ground.

en	TomTom WebFleet

en	LV Pieces of World

en	Fill in the Customer account, Username and Password for your Trimble account. Vehicles can receive route data. When the credentials are filled in correctly, the gray box turns green.

en	LV Europe/France – HV

en	If there is an error in the FTP server address, FTP server directory, User or Password, the box turns red.

en	When “Light vehicle” is chosen from the “Routing engine” drop-down menu, options specific to light vehicles will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`lv_shortest`

en	:numref:`satellite2_base_map` :

en	Edit a custom field

en	Click on |sync_vehicles| to allocate a mobile device to a vehicle.

en	Each user has their own individual “User settings” to customize their interface, configure their login credentials etc.

en	They are sent to Mapotempo Live and can be found on mission sheets.

en	If there is an error in the Username or API key, the box turns red.

en	Create custom fields

en	Trimble

en	LV Israel

en	Mobile devices are devices installed on board vehicles or issued to drivers. :numref:`services-all-600_new`

en	URL Click2Call

en	Mapnik

en	The buttons to the right of items show whether optimization settings are active (On) or inactive (Off).

en	When “Pedestrian” is chosen from the “Route calculator” drop-down menu, options specific to pedestrians will be displayed. These can all be adjusted, and can be set/modified on each vehicle page (see section on Vehicle management). :numref:`pedestrian`

en	Current password: enter your current password. *Without this information, you cannot change your password.*

en	http://www.example.com?planning_ref={PLANNING_REF}&route_ref={ROUTE_REF}

en	Base

en	The height of the vehicle is expressed in meters. It must be between 0 and 50 meters. You can use the arrows to the right of the field, or enter the required number directly.

en	Orange Fleet Performance

en	the account global settings page, in the Custom fields section.